Handleiding
Je bekijkt pagina 45 van 52
EN 21
EN
Faults table
When you have any doubts about whether your appliance is working properly you should not
immediately assume that it is defective. We recommend that you should in any case check the
points in the following table.
Symptom Possible cause Solution
The appliance emits a slight
odour when used for the first
time.
New appliance. This is normal and disappears
when the appliance starts
cooling.
The appliance does nothing;
the lighting does not come
on.
Plug not in socket. Insert the plug in the socket.
Thermostat off. Adjust the thermostat to the
correct setting.
Temperature inside the
appliance too high or too low.
Thermostat setting incorrect. Adjust the thermostat
properly.
The door seals are dirty or the
seals are damaged.
Clean the door seals. Call
the service centre if the door
seals are damaged.
Door seals not installed
correctly.
When changing the direction
of rotation of the door, the
door seal must be turned
180°. Check if this is correct.
The alarm indicator flashes. The appliance is switched on
for the first time.
If after 24 hours the alarm
indicator still flashes, contact
the service department.
The door has been opened
for too long or too frequently.
The door does not seal
properly (the seal is dirty, the
door is misaligned, the seal
is damaged, the seal is not
installed correctly, etc.).
Too much fresh food has
been put in at the same time.
The appliance has been
switched on again (for
example after a lengthy
power failure).
FAULTS
Bekijk gratis de handleiding van Pelgrim PVD28178N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pelgrim |
| Model | PVD28178N |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 2798 MB |