PCE Instruments PCE-HM 500 handleiding
Handleiding
Je bekijkt pagina 10 van 13
© PCE Instruments
7
English
3 Getting started
The web of the heating mantle is lubricated. Before using the device for the first time, you should
heat it up without a flask. When doing so, there is the possibility of smoke generation. Wait for the
smoke to vanish. The heating mantle is now ready to use.
4 Operation
To use the heating mantle, follow these steps:
1. Place the heating mantle on a stable, clean, non-slip and fire-proof surface.
2. Fill a flask with the liquid to be heated. Make sure that you do not overfill the flask.
3. Place the flask on the web of the heating mantle.
4. Turn on the device. The red lamp illuminates.
5. Turn the rotary switch to the desired position to start the heating process. The green
lamp illuminates.
6. The lamp glows brighter or darker, depending on the set temperature.
ATTENTION: Do not touch the flask or the upper body of the heating mantle when
it is in use.
5 Maintenance
Clean the heating mantle on a regular basis to increase its life span.
Depending on the contamination, use isopropyl alcohol, water or water-containing tensides.
Before cleaning, make sure that the device is turned off and that the power line is unplugged.
Wear proper protective gloves during the cleaning.
Bekijk gratis de handleiding van PCE Instruments PCE-HM 500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PCE Instruments |
| Model | PCE-HM 500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1213 MB |
