PCE Instruments PCE-HM 1000 handleiding
Handleiding
Je bekijkt pagina 8 van 13
© PCE Instruments
5
English
1 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The
device may only be used by qualified personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
• The device must only be used as described in this instruction manual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
• The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specifications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
• Do not expose the device to shocks or strong vibrations.
• The case should only be opened by qualified PCE Instruments personnel.
• Never use the instrument when your hands are wet.
• You must not make any technical changes to the device.
• The device must only be used with accessories from PCE Instruments or equivalent.
• Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
• Do not use the instrument in explosive atmospheres.
• The measurement range as stated in the specifications must not be exceeded under
any circumstances.
• Wear safety equipment, such as goggles, gloves or breathing masks to protect yourself
against splashing liquids and escaping gases.
• Place the device on a flat, clean, non-slip and fire-proof surface.
• The set temperature has to be at least 25 °C lower than the flash point of the material
to be heated.
• Make sure that the flask is not filled too far, especially when working with inflammable
or corrosive liquids. The liquids might overboil and leak from the flask which might
cause damage to the equipment or to persons.
• Make sure that the flask is dry from the outside.
• Pathogenic materials should only be heated in closed vessels.
• Inspect the flasks for visible damage before heating. Do not heat up damaged flasks.
• Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
Bekijk gratis de handleiding van PCE Instruments PCE-HM 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PCE Instruments |
| Model | PCE-HM 1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1213 MB |
