PCE Instruments PCE-ERS 100 handleiding
Handleiding
Je bekijkt pagina 2 van 4
2
ON: To turn scale ON.
OFF: To turn scale OFF.
→T←: A. To zero the scale
B. To exit the control function but not to zero the scale.
C. Press and hold for 3 seconds to exit the control function and to zero the scale.
UNIT: A. To change unit to kg, lb or lb-oz, oz, g.
B. To pause/continue the control function.
START: To enter control function.
1. Remove platform from case.
2. Press ON key and select desired units by pressing UNIT.
3. Press →T← key.
4. Carefully place the object to be weighed directly in the center of the platform.
5. Gross weight will then be displayed.
6. When weighing has been completed, press OFF key.
(For working with solenoid valve in charging/recovery)
START: Enter/Go
UNIT: To shift to dierent decimal.
→T←: To add 1 to the selected decimal.
1. Press START, readout of previous input value appears.
2. Set a new input value by using UNIT and →T←.
3. Press START to conrm input value. The weight on platform will be indicated and control function will
begin.
4. The unit indication will ash during control function.
5. The control function will be completed when the input value has been achieved (positive or negative) on
top of the initial weight, and the scale will sound a signal.
6. Following cycle will be displayed: “GOOD->initial weight -> input value -> nal weight”
7. Press UNIT, START or →T← to return the regular operation.
KEY FUNCTIONS
GENERAL WEIGHT MEASUREMENT
CONTROL FUNCTION
Bekijk gratis de handleiding van PCE Instruments PCE-ERS 100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PCE Instruments |
| Model | PCE-ERS 100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 666 MB |
