PAX Eos 100H handleiding
Handleiding
Je bekijkt pagina 21 van 42
21
Balancing the airflow.
GB
How to use.
UK
Starting the auto-balancing:
- Automatic adjustment of airflow balance of flows Low, Medium and High is made by fan
motor adjusts its speed and the air dampers are regulated in a specific order.
- Press 3 seconds to start automatic balancing.
- When the automatic balancing begins stopped possible preheater and blower motor runs on
high flow for 1 hour to stabilize any temperature.
- During balancing flashing signal light
Do not break the power or touch any buttons at Eos/remote control while automatic balancing
is going on.
- When auto-balancing is complete the settings are saved automatically, and the unit return
to the previous operating mode.
- During the auto-balancing is only the start button accessible.
- The auto-balance takes approximately 75 minutes to complete.
Resetting to factory defaults:
- Press at the same time 10 seconds on and when the unit is in Standby mode.
This will delete the saved values from auto-balancing and restores to factory settings.
One half long buzzer sound confirms the setting.
Auto-Balancing is performed after the installation of Eos is complete.
Bekijk gratis de handleiding van PAX Eos 100H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PAX |
| Model | Eos 100H |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 6150 MB |
