Patterson H22A handleiding
Handleiding
Je bekijkt pagina 10 van 16
There are many applications for the Patterson Pedestal Base
34” fan. Use care when selecting locations for the fan. Do not
place the fan on a sloped surface. Do not use if the OSHA
Compliant Patterson finger guards are missing or damaged
or not fitted properly. Do not use if the cord or connector has
exposed wires or is damaged in any way.
1. If you ordered the fan head and the pedestal base together
on the same purchase order, they will be shipped from the
factory pre-assembled.
2. If you ordered these separately, begin mounting the fan
head to the pedestal base by first securing the separate
PB telescoping upright arms to the fan head stud bolt on
either side of the fan housing, leaving them loose for free
swinging.
3. After attaching the upright arms to the fan head (loosely)
using a fork lift to pickup the fan head maneuver the fan
head directly over the pedestal base and slowly lower until
the upright telescoping arms slip into the fixed uprights of
the base.
4. Inserted arm should measure 33”-34” in total height from
floor, keeping fan level between the two uprights. Some
tapping with a block of wood or hammer may be necessary.
5. Tighten nuts on stud bolts, connecting the upright arms to
the fan head housing.
Note: Due to continual product improvement, items are subject
to change without notice.
PEDESTAL BASE
ASSEMBLY
PB
pattersonfan.com
10
Bekijk gratis de handleiding van Patterson H22A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Patterson |
| Model | H22A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3225 MB |
