Patterson H18B handleiding
Handleiding
Je bekijkt pagina 6 van 16
Important: The wall mount should be a solid structure able to support the weight of the
fan safely and the fan should not be at a height that will cause employees to bump their
heads. Ideally, the fan should be mounted to blow into the back of the truck down the top
corner of either side of the trailer.
1. Secure the wall bracket and arm to the solid surface where you will hang the fan. A
structurally secure solid wall or beam is best.
2. Secure the “U” shaped yoke to the arm of the wall bracket. Use the 5/8” bolt and 5/8”
nut supplied. Tighten the nut onto the bolt using a 5/16” box end wrench and ratchet
with a 5/16” socket. For clearance reasons, the “U” shaped yoke must open down.
3. The fan head fits inside the “U” shaped yoke, the threaded studs on each side of the
fan fits through the predrilled holes on the “U” shaped yoke. Secure the fan head to
the “U” shaped yoke with the supplied nuts. Mount the fan head so that the motor
capacitor is in its up position.
Note: Due to continual product improvement, items are subject to change without notice.
TRUCK COOLER
ASSEMBLY
TC
pattersonfan.com
6
Bekijk gratis de handleiding van Patterson H18B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Patterson |
| Model | H18B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3225 MB |
