Party Light & Sound PARTY-STREET1 handleiding

24 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 3 van 24
3
©Copyright LOTRONIC 2024
CONNECTORS ON THE REAR PANEL
MIC
USB
ON/OFF
AUX
TF
DC5V
1 2
3 4 5 6
1. Microphone input
2. USB input
3. 5V󰐆 power input via USB C connector
4. MicroSD card input
5. AUX input
6. ON/OFF switch
CONNECTION OF A WIRED MICROPHONE (NOT INCLUDED)
Connect the microphone to the MIC socket and switch it on.
Note: If you are playing music from any other input, connecting the micro-
phone will not mute the sound output.
KARAOKE FUNCTION
This feature is available with any input. Play a track through AUX/USB/TF/Bluetooth, connect a microphone and
sing along.
USB/TF OPERATION
Keep the speaker away from high temperatures, strong magnetic 󰊟elds and any equipment that could generate
interference. If the speaker stops working, switch it o󰊞 and on again, or unplug USB/TF card and re-plug it. The
speaker should be back to normal status.
The maximum size of USB/TF device that can be connected is 32 GB.
BLUETOOTH OPERATION
1. Turn on the unit and press the input selector button on unit to select the Bluetooth function. The unit will
connect automatically to previously paired Bluetooth devices nearby.
2. For a new Bluetooth connection, activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as «PARTY-STREET».
4. Press the ▶ǁ to start playing and the buttons and for the selection of songs.
TWS CONNECTION
1. Power on both speakers at the same time (both speakers must have the same bluetooth name) and enter
into standby mode;
2. Long press the "mode" key on any one of the two speakers. Release when you hear a "beep". Wait about 5
seconds, and you will hear a successful connection tone.
3. Turn on the BT function of your mobile phone, search for devices and select PARTY-STREET.
4. When the two speakers are connected, long press the "mode" key of one speaker to disconnect the TWS
function.
SPECIFICATIONS
Model PARTY-STREET1 PARTY-STREET2
Speaker 4"/10cm 2 x 3"/8cm
Power 100W 100W
Frequency response 150Hz – 18kHz 150Hz – 18kHz
S/N ratio >80dB >80dB
THD <10% <10%
Rechargeable battery 3.7V󰐆 3Ah 3.7V󰐆 3Ah
BT frequency band 2402-2480MHz 2402-2480MHz
Max. RF emission power -0.32dBm -0.41dBm
Input voltage 5V󰐆 1A 5V󰐆 1A
Dimensions 310 x 145 x 170mm 335 x 150 x 190mm
Weight 1.89kg 2.1kg

Bekijk gratis de handleiding van Party Light & Sound PARTY-STREET1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkParty Light & Sound
ModelPARTY-STREET1
CategorieSpeaker
TaalNederlands
Grootte3502 MB