Party Light & Sound PARTY-MOBILE8 handleiding

Speaker

Party Light & Sound

28 pagina's

PDF beschikbaar

Handleiding

©Copyright LOTRONIC 2023

2. Microphone volume control

3. Echo control for the microphone

4. USB stick input

5. TF card input

6. AUX input via 3.5mm Jack

7. Input selector: Press this button to switch between the various inputs (AUX, USB, TF, Bluetooth)

8. Display

9. In USB/TF/Bluetooth mode: press to go back to the previous track.

10. Play/pause in USB/TF/Bluetooth mode.

11. In USB/TF Bluetooth mode: press to go to the next track.

12. 5V USB input: plug the supplied USB charging lead into this socket to charge the built-in battery.

13. This LED lights up in blue when the battery is fully charged

14. When the USB charging lead is connected, the indicator lamp will light up in red and the battery will charge

15. Master volume control

16. ON/OFF switch of the system

17. Switches the LED on the woofer on /o󰊞

DESCRIPTION OF THE REMOTE CONTROL

10 11

MUTE

REC

PLAY

REC

SCAN

VOL+





VOL-

1. MUTE: Mutes the sound output

2. Input selector: Press this button to switch between the various inputs (AUX, USB, TF,

Bluetooth)

3. REC: Press to start recording on the TF card or USB stick

4. REC PLAY: Press to play your recorded 󰊟le from the TF card or USB stick

5. Increase the volume

6. Select previous 󰊟le

7. Play/Pause/Select

8. Select next 󰊟le

9. Reduce the volume

10. Repeat one/repeat all tracks

11. Equalizer: Cycles through the various music styles:

12. Number buttons for direct input of a 󰊟le number. Press the number of the 󰊟le to ac-

cess it directly. For 󰊟les numbers above 9, press 1+ the unit. Ex. For 󰊟le number 15,

press 1 + 5. For 󰊟le number 38, press 3+8

CONNECTION OF THE WIRED MICROPHONE

Connect the microphone to the MIC IN socket and switch it on.

Note: If you are playing music from any other input, connecting the microphone will not

mute the sound output.

KARAOKE Function

This feature is available with any input. Play a track through AUX/USB/TF/Bluetooth, connect a microphone and

sing along.

USB/TF Operation

Keep the speaker away from high temperatures, strong magnetic 󰊟elds and any equipment that could generate

interference. If the speaker stops working, switch it o󰊞 and on again, or unplug USB/TF card and re-plug it. The

speaker should be back to normal status.

The maximum size of USB/TF device that can be connected is 32 GB. Supported music formats: MP3, WMA

Use of the supplied stand

Unfold completely the legs of the supplied stand in order to ensure maximum stability. Extend the bar to the

desired length and secure it via the screw. Insert the rod into the hole on the bottom of the speaker.

BLUETOOTH OPERATION

1. Turn on the unit and press the input selector button on unit to select the Bluetooth function.

2. Activate the Bluetooth feature on the external device to be paired.

3. Initiate a search for devices. The device shows up as «PARTY-MOBILE8-SET».

Bekijk gratis de handleiding van Party Light & Sound PARTY-MOBILE8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.