Handleiding
Je bekijkt pagina 16 van 22
13
It is recommended that for your convenience, the machine is positioned close to your
washing machine. Whilst drying, the tumble dryer will expel a certain amount of warm,
very moist air, and this should be removed from the room as quickly as possible to
prevent condensation. In an extremely well ventilated room or close to an open
window, this may occur naturally.
Simple installation
Step 1: Dryer should be placed in a ventilated are with
not less than 10cm distance from the wall. If placed in
a room such as a bathroom, it is suggested there are no
obstacles within 1.5m in front of the dryer and keep
ventilated.
Step 2: The horizontal adjustment:
Tie a heavy subject on the string on the front and two sides of the dryer. Please refer
this to below figure, and if A=A, B=B, this means the dryer is placed horizontally. While
the, you could place something on the grounding.
Notice:
If the dryer cannot be placed
horizontally (the lean angle is
no more than 2), the dryer
will be unbalanced and stop
working.
Do NOT install the dryer in the open air or place easily damaged by rain
Do NOT place the back of the dryer near curtains
Do NOT place the dryer near gas or a flammable area
The tumble dryer must be installed in a clean place, where dirt does not build up.
Make sure there are no obstructing items or material near the air-intake louvres at the
back (e.g. paper, rags, etc.). To keep vibration and noise to a minimum when the dryer
is in use, it should be placed on a firm, level surface.
Installation
Bekijk gratis de handleiding van Parmco PT-F7-R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | PT-F7-R |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3924 MB |