Handleiding
Je bekijkt pagina 14 van 46
13
Unpacking and positioning
• Unpack the appliance carefully.
• The appliance may be equipped with the transport-protection. Be very careful
and do not use any aggressive or abrasive detergents to remove residuals of the
transport protection.
• Check that the appliance and the power cord are not damaged.
• Connect the appliance to a dedicated socket only.
• Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
• Connect the appliance to the mains properly.
Selection of installation equipment
• Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hob.
• For the purpose of installation and use, a minimum of 50mm space shall be
preserved around the hole.
• The safety distance between the hob and a wall cupboard above should be at
least 450mm.
• The safety distance between the hob and an extractor hood above should be at
least 650mm.
• Cut out the work surface according to the sizes shown in the drawing.
Models L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
HO33BI2 300 520 62 58 270 490 50mini
HO36BI4 590 520 62 58 560 490 50 mini.
HO36BIZ4
HO66BIZ4
590 520 56 52 560 490 50 mini.
HO39BI5
HO69BIZ5
900 520 56 52 790 490 50 mini.
2. INSTALLATION
Bekijk gratis de handleiding van Parmco HO69BIZ5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO69BIZ5 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3731 MB |
