Handleiding
Je bekijkt pagina 34 van 35
32
Some pans make
crackling or
clicking noises.
This may be caused by the material of your cookware
(layers of different metals vibrating differently).
This is normal for cookware and does not indicate a fault.
Pans do not
become hot and
appears in the
display.
The induction hob cannot detect the pan. Check the pan
base size, if it is too small for the cooking zone or not
properly centered. Use cookware suitable for induction
cooking. See section ‘Choosing the right cookware’.
Centre the pan and make sure that its base matches the
size of the cooking zone.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists,
please contact the shop you purchased the appliance at.
If an abnormality comes up, the hob will enter the protective state
automatically and display corresponding protective codes:
Error Code for Ceramic hob
Problem
Possible causes
What to do
E0 &
repeated
beep sound
warning.
Overheating
protection: the hob is
over heated.
Stop cooking till the internal
temperature back to normal. Please
contact after sales service to check the
hob if there is PCB failure.
E1
Open circuit failure
of thermocouple
Please contact after sales service.
The above are the judgment and inspection of common failures.
ATTENTION! To avoid danger, please do not disassemble the unit by
yourself!
6. ERROR CODE
Bekijk gratis de handleiding van Parmco HO39BC5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO39BC5 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1639 MB |
