Handleiding
Je bekijkt pagina 24 van 35
22
For HO16BC4
Switching the hob on and off
1. Touch the ON/OFF key (1). The power indicator lights up. The hob is in
standby mode.
2. Place a suitable pan on the cooking zone that you wish to use. Make sure the
bottom of the pan and the surface of the glass are clean and dry.
3. Turn the knob that controls the cooking zone you intended to use to the
power level you want to set, a zone indicator will light up.
If you don’t choose a heat setting within 1 minute, the hob will automatically
switch off. You will need to start again from step 1.
The hob has two step activation protection. After switching on, the hob will not
start heating automaticlly even the knob is not in OFF position. You have to
turn it to activate the zone. Always turn the knob to OFF position when you
finish the cooking.
When you have finished cooking
Turn the control knobs to “OFF” position.
Touch the ON/OFF key (1) and the power indicator disappear.
Residual Heat Warning (Beware of hot surfaces)
When the hob has been operating for some time, there will be some residual
heat. The power indicator will appear “H” or red light twinkling to warn you to
keep away from it.
It will disappear when the surface has cooled down to a safe temperature. It can
also be used as an energy saving function if you want to heat further pans, use
the cooking zone that is still hot.
Using the extendable zone (For HO36BC4, HO377BC4, HO39BC5)
If your hob is equipped with an extendable zone, it can be used in the following
modes:
A: Center zone – only first heating unit is turned on
B: Extended zone (Center + Outer) – Both first and second heating circuits are
turned on
Bekijk gratis de handleiding van Parmco HO39BC5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO39BC5 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1639 MB |
