Handleiding
Je bekijkt pagina 27 van 35
25
7. A signal sound will beeps for 10 seconds and the timer indicator shows
“ ” when the setting time finished.
Settingthetimertoturnoneormorecookingzonesoff
Ifthetimerissetononezone:
1. Selecting the heating zone key (4) that you want to set timer.
2. For HO39BC5, Touching the IndicatorA.B.C.D.E. to choose the cooking
zone that you wish to switch off.
3. Touch timer key (6), the digits “05” / “10” will show in the timer display.
4. For HO39BC5, touch timer key (6), “05” will show in the timer display.
and single digit “5” flashes.
5. Set the desired time in the control panel.
6. When the time is set, it will begin to count down immediately. The display
will show the remaining time.
NOTE: The red dot next to power level indicator (eg. ) will illuminate
indicating that the zone is in timer mode.
5. When cooking timer expires, the corresponding cooking zone will be switch
off automatically.
NOTE: Other cooking zones will keep operating if they are turned on
previously.
Ifthetimerissetonmorethanonezone:
1. When you set the time for several cooking zones simultaneously, decimal
dots of the relevant cooking zones are on. The minute display shows the
remaining time. The dot of the corresponding zone flashes.
2. Once the countdown timer expires, the corresponding zone will switch off.
Then it will show the remaining activated timer and the dot of corresponding
zone will flash.
3. To check the remaining time set on a particular zone, touch the zone (4) and
the corresponding timer will be shown in the timer indicator.
Bekijk gratis de handleiding van Parmco HO36BC4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO36BC4 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2990 MB |
