Handleiding
Je bekijkt pagina 17 van 35
15
The hob shall not be mounted to cooling equipment, dishwashers and
rotary dryers.
The hob shall be installed such that better heat radiation can be ensured to
enhance its reliability.
The wall and induced heating zone above the work surface shall withstand
heat.
To avoid any damage, the sandwich layer and adhesive must be resistant
to heat.
A steam cleaner is not to be used.
This hob can be connected only to a supply with system impedance no
more than 0.427 ohm. In case necessary, please consult your supply
authority for system impedance information.
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant
standard, or a single-pole circuit breaker. The method of connection is shown
as the diagram.
,Kϯϲϰ,Kϭϲϰ ,Kϯϳϳϰ ,Kϯϵϱ,KϯϯϮ
,Ϭϱ''Ͳ&ϱ'ϭϱΎϬϱZZͲ
&ϯ'ϭϱΎ
This hob must be connected to the mains power supply only by a suitably
qualified person, who is familiar with and adheres to the local requirements and
supplementary regulations of your electricity supplier. Do not carry out the
installation yourself. RISK OF ELECTRIC SHOCK. Before connecting the
hob to the mains power supply, check that:
The domestic wiring system is suitable for the power drawn by the hob.
Bekijk gratis de handleiding van Parmco HO36BC4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO36BC4 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2990 MB |
