Parmco HO36BC4 handleiding

35 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 35
11
Unpacking and positioning
Unpack the appliance carefully.
The appliance may be equipped with the transport-protection. Be very careful
and do not use any aggressive or abrasive detergents to remove residuals of the
transport protection.
Check that the appliance and the power cord are not damaged.
Connect the appliance to a dedicated socket only.
Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
Connect the appliance to the mains properly.
Selection of installation equipment
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hob.
For the purpose of installation and use, a minimum of 50mm space shall be
preserved around the hole.
The safety distance between the hob and a wall cupboard above should be at
least 450mm.
The safety distance between the hob and an extractor hood above should be at
least 650mm.
Cut out the work surface according to the sizes shown in the drawing.
Models L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
HO33BC2 300 520 50 46 270 490 50 mini
HO36BC4 590 520 50 46 560 490 50 mini.
HO16BC4 590 520 50 46 560 490 50 mini.
HO377BC4 770 520 50 46 734 490 50 mini.
HO39BC5 900 520 50 46 830 490 50 mini.
2. INSTALLMENT

Bekijk gratis de handleiding van Parmco HO36BC4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkParmco
ModelHO36BC4
CategorieFornuis
TaalNederlands
Grootte2990 MB