Handleiding
Je bekijkt pagina 23 van 35
21
Using your Hob with touch control panel
Switching the hob on and off
Switch the hob on and off by using the main switch.
1. Touch the ON/OFF key (1). All the indicators show “- “. The Hob is in
standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the glass are clean and
dry.
3. Select zone by touch corresponding zone selection key (4), an indicator next
to the key will flash.
4. Select power level by touching the MINUS (2) or PLUS key (3). The power
can be changed during cooking as required.
• If you don’t choose a heat setting within 1 minute, the hob will
automatically switch off. You will need to start again from step 1.
5. While cooking, the power level can be changed at any time.
When you have finished cooking
1. Selecting the burner that you wish to switch off by pressing the zone
selection key (4).
2. Turn the cooking zone off by touching MINUS key (2) until power level
reduce to ”0”.
3. To turn the whole hob off, touch the ON/OFF key (1).
4.You can use the residual heat for saving energy when starting a new cooking
procedure on a cooking zone which is still warm / hot.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
Bekijk gratis de handleiding van Parmco HO33BI2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO33BI2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2686 MB |
