Handleiding
Je bekijkt pagina 24 van 36
22
3. Select zone by touch corresponding zone selection key (4), an indicator next
to the key will flash.
4. Select power level by touching the MINUS (2) or PLUS key (3). The power
can be changed during cooking as required.
For HO39BC5, touch the Key (9) to the level you want to set.
• If you don’t choose a heat setting within 1 minute, the hob will automatically
switch off. You will need to start again from step 1.
5. While cooking, the power level can be changed at any time.
When you have finished cooking
1. Selecting the burner that you wish to switch off by pressing the zone
selection key (4).
2. Turn the cooking zone off by touching MINUS key (2) until power level
reduce to ”0”.
For HO39BC5, touch the Key (9) to “0”.
3. To turn the whole hob off, touch the ON/OFF key (1).
4.You can use the residual heat for saving energy when starting a new cooking
procedure on a cooking zone which is still warm / hot.
For HO16AC4, HO16BC4
Switching the hob on and off
1. Touch the ON/OFF key (1). The power indicator lights up. The hob is in
standby mode.
2. Place a suitable pan on the cooking zone that you wish to use. Make sure the
bottom of the pan and the surface of the glass are clean and dry.
3. Turn the knob that controls the cooking zone you intended to use to the
power level you want to set, a zone indicator will light up.
If you don’t choose a heat setting within 1 minute, the hob will automatically
switch off. You will need to start again from step 1.
The hob has two step activation protection. After switching on, the hob will not
start heating automaticlly even the knob is not in OFF position. You have to
Bekijk gratis de handleiding van Parmco HO16AC4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | HO16AC4 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3047 MB |
