Handleiding
Je bekijkt pagina 6 van 15
10 11
OPERATION
Before first use
Take out and wash the oven fittings with warm water and a little washing-up liquid.
Switch on the ventilation in the room or open a window.
Heat the oven (to a temperature of 250, for approx. 30 min.), remove any stains and
Choose a pan with a diameter that is at least as large as the heating zone.Do not use
The heating zones have different levels of heat. The level of heat can be adjusted
When heating the oven or the first time it is normal for the stove to give
off smoke and manufacturing odours.These will disappear after about 30
Remove packaging and empty t
he
drawer.Clean the interior of the oven with
Minutes.
warm soapy water and wipe clean with moistened cloth or sponge. Wipe clean the
wash carefully. The hotplates should be heated for around 4 minutes without
a pan or pot on them.
cooktop.
Choice of cookware
Controlling the heating zones of the ceramic hob
pans with a concave and convex base.Always remember or put a proper cover on the
pan.We recommend the use of pans with thick,even bases.
If the heating zones and pans are soiled it is impossible to make full use of the heat.
Right
Wrong
WrongWrong Wrong
Heat level selection
Step
Suitable for
0
1-2
3
4-5
6
7-8
9
hot plate off,use of remaining heat
maintaining temperature,slow cooking,small quantities of food(min power)
slow cooking
slow cooking of large quantities,slow frying of large big chunks
frying,preparing soup basis
fry
boiling,browning,frying(maxmium power)
-push the knob gently and then turn it;
-set it to the right position.
The marks at the knob show the different levels reached by the heating zones.
the control panel,to select it you should:
gradually by turning the appropriate knob to the right or left.The knob are unfold on
3
7
5
9 1
00
OPERATION
If the temperature of a heating zone exceeds 65
Zone heating indicator
Double-ring energy regulator control mode
The double-ring hob is controlled using a
double-ring energy regulator. The inner ring or
inner and outer rings of the hob can be controlled
to work at the same time. When the energy
regulator is turned on for the first time, the 0-9
gears work for the inner ring;
if the double ring is used, it is necessary to turn“ ”
and then turn on the double ring to work at the
same time.
degree this is signalled by an indicator which lights
up for that zone.
When the heating indicator lights up it warns the
person using the cooker against touching a hot
heating zone.
For about 5 to 10 minutes after a heating zone is
switched off it will still have residual heat that can
be used,for example to warm up or keep dishes
warm without switching on another heating zone.
Zone heating indicator
Bekijk gratis de handleiding van Parmco FS900SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parmco |
| Model | FS900SC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2535 MB |
