Parkside PZM 2 B3 handleiding
Handleiding
Je bekijkt pagina 79 van 460
79GB/IE
o Over current will cause the
fuse
[]
to blow.
Measuring resistance
1. Connect the black colour test
probe[1] to terminal: COM
[]
.
2. Turn the rotary knob[6] to .
3. Press SELECT[5] until
[]
and
[]
have gone off in the
display[2].
4. Connect the black colour test
probe[1] and the red colour test
probe[8] across the resistor to
be measured.
5. The reading is shown in the
display[2].
NOTES:
o Measurements > 1 MΩ: The
product may take several
seconds to stabilize the reading.
This is normal for high resistance
measurement.
o If the probes are open: OL
(“over range”) is shown in the
display[2].
o Before measurement:
– Disconnect all power at the
circuit to be tested.
– Discharge all capacitors
thoroughly.
Bekijk gratis de handleiding van Parkside PZM 2 B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PZM 2 B3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23948 MB |
