Parkside PWDS 920 C3 handleiding
Handleiding
Je bekijkt pagina 6 van 48
PWDS 920 C3
GB
│
CY
│
3 ■
Technical data
Rated voltage 230 V ∼, 50 Hz
(AC)
Rated power
consumption 710 W
Rated speed n
0
800–1800 rpm
Rated capacity Ø 215 mm
Protection class II /
(double insulation)
Noise and vibration data
Noise measurement value determined in accord-
ance with EN62841. The A-weighted noise level
of the power tool is typically:
Noise emission value
Sound pressure level L
PA
= 92.8 dB
Uncertainty K = 3 dB
Sound power level L
WA
= 100.8 dB
Uncertainty K = 3 dB
Wear ear muffs!
Total vibration value
Surface sanding a
h, DS
≤ 2,5 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
► The vibration emission values and noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
WARNING!
► It is necessary to establish safety measures to
protect the operator based on an estimation
of the vibration load during actual use
(wherein all states of operation must be
included, e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General power
tools afety warnings
WARNING!
► Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Bekijk gratis de handleiding van Parkside PWDS 920 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PWDS 920 C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5343 MB |
