Parkside PWD 30 C1 handleiding
Handleiding
Je bekijkt pagina 23 van 44
21GB/IE/NI
m
WARNING!
u Empty and clean the product before
and after use to avoid the collection of
materials that could pose a fire hazard in
the product.
Fig.R
1. Turn the cap of the drain outlet
[] in
anti-clockwise direction to remove the cap.
2. Empty the metal container
[].
3. Put the cap back on the drain outlet
[]. Turn
the cap in clockwise direction.
Cleaning the pleated filter
m
WARNING!
u Check the pleated filter
[] regularly for
damage and deformation. A damaged or
deformed pleated filter can not be cleaned
and must be replaced. This is necessary
to maintain the functionality of the product
and to protect the product of damage.
u Only use replacement filters from Lidl or
authorized resellers. Filters that are not
compatible with the product can lead to
injury and product damage.
NOTE
u Clean the pleated filter
[] after each use
to preserve the full suction power of the
product.
Fig.A
1. Connect the mains plug
[] to a suitable
mains supply.
2. Set the on/off switch
[3] to positionI.
3. Turn the airflow controller
[4] to
MAXposition.
4. Press the self-cleaning button
[5] for about
3to4 times.
After use
1. Switch off the product and disconnect the
mains plug
[] from the socket-outlet.
2. Let the product cool down.
3. Check, clean and store the product (see
“Cleaning and care”).
Replacement parts/Accessories
Contact the service centre via telephone (see “Service”). Have the model number mentioned below
ready.
Figure Part Line drawing Part name Model number
B
[]
Flexible hose —
B
[]
Handle —
B
[]
Telescopic suction tube —
B
[]
Crevice nozzle —
Bekijk gratis de handleiding van Parkside PWD 30 C1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PWD 30 C1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7379 MB |
