Parkside PWD 30 C1 handleiding
Handleiding
Je bekijkt pagina 19 van 44
17GB/IE/NI
1. Unpack all parts and lay them on a flat,
stable surface.
2. Remove all packaging materials and shipping
devices if applicable.
3. Make sure that you have all the accessories
and tools needed for assembly and
operation. This also includes suitable personal
protective equipment.
Before use
m
WARNING!
u There is a risk of accident if the product is
operated using an electrical mains supply
that does not match the specifications
shown on the rating label of the product.
u The mains voltage and the frequency of
the mains source must correspond with the
specifications on the product's rating plate.
m
WARNING!
Switch off the product and disconnect
it from the mains before replacing
attachments, cleaning and when not
in use.
Assembling the swivel castors
Fig. C
1. Turn the metal container
[] upside down, so
its bottom is facing upward.
2. Insert the swivel castor
[] into the slots of the
plastic holder until it is click-locked.
3. Check if the swivel castor
[] can rotate
freely.
Connecting/removing the
flexible hose
Vacuuming
Fig.D
1. Align the hose coupler
[] of the flexible
hose
[] with the vacuum connector[9].
2. Push the hose coupler
[] slowly into the
vacuum connector
[9] until the lock button[]
clicks into place.
3. Check if the flexible hose
[] is connected
properly by pulling the hose coupler
[]
slightly. If the hose coupler does not move, the
flexible hose is connected properly.
4. Check if the flexible hose
[] can be rotated
freely.
5. Removing: Press the lock button
[] down.
Pull the hose coupler
[] out of the vacuum
connector
[9].
Blowing air
Fig.E
NOTE
u This is an auxiliary function which can be
used to blow away dust or small objects.
1. Align the hose coupler
[] of the flexible
hose
[] with the blow connector[].
2. Push the hose coupler
[] slowly into the blow
connector
[] until the lock button[] clicks
into place.
3. Check if the flexible hose
[] is installed
properly by pulling the hose coupler
[]
slightly. If the hose coupler does not move, the
flexible hose is connected properly.
4. Check if the flexible hose
[] can be rotated
freely.
5. Removing: Press the lock button
[] down.
Pull the hose coupler
[] out of the blow
connector
[].
Connecting/Removing the
handle
Fig.E
o Connecting the handle: Align the hose
coupler
[] of the flexible hose[] to the
handle
[]. Push the hose coupler until the
hose coupler is securely connected to the
handle.
o Removing the handle: Pull out the hose
coupler
[] from the handle[].
Bekijk gratis de handleiding van Parkside PWD 30 C1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PWD 30 C1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7379 MB |
