Parkside PWD 20 B2 handleiding
Handleiding
Je bekijkt pagina 28 van 176
GB
MT
28
• When wet vacuuming, make sure that
the vacuum cleaner is always higher
than the water surface to be vacuumed.
Otherwise, a siphon effect could occur.
Permitted filters and nozzles
• Filter
• Foam filter (15)
• Filter bag
• without
• Nozzles
• Floor nozzle (18)
• without
Vacuuming fine dust
Notes
• Never perform vacuuming without a fil-
ter!
• To vacuum fine dust, you will need an
additional fine dust filter bag (Spare
parts and accessories, p.32).
Permitted filters and nozzles
• Filter
• Pleated filter (not included)
• Filter bag
• Fine dust filter bag (not included)
• Nozzles
• All
Blowing
Preparing the blowing function
(Fig.D)
1. Remove the filter and filter bag.
See Attaching and removing the filter
and filter bag, p.26.
2. Insert the suction hose (13) into the
blowing connector (11).
See Attaching and removing the suc-
tion hose, p.27.
Switching on and off
Preparation
1. Fully unwind the suction hose (13).
2. Prepare the device for the desired func-
tion: Filter, filter bag, suction hose, suc-
tion tube, nozzle
3. Insert the machine plug into a wall
socket.
Switching on
1. Move the On/Off switch (3) to the po-
sition “I” (ON).
Switching off
1. Move the On/Off switch (3) to the po-
sition “0” (OFF).
2. Pull the device plug out of the wall out-
let if you are leaving the device unat-
tended or if you have finished working.
Cleaning, maintenance
and storage
WARNING! Electric shock! Risk of in-
jury due to unintentional start-up. Protect
yourself when performing maintenance or
cleaning work. Switch off the device and
disconnect the mains plug from the socket.
You should have any repair and mainten-
ance work that is not described in these
instructions carried out by our Service
Centre. Only use original replacement
parts.
Cleaning
Cleaning
NOTICE! Risk of damage! Improper
cleaning can damage the device. Nev-
er spray down the device with water. Do
not use any abrasive cleaning agents or
solvents.
General cleaning
1. Empty the dirt container (6).
2. Clean the dirt container (6) with a
damp cloth.
3. Tap out the textile filer (16). If needed,
wash the textile filter with warm water
and soap and let it dry.
Bekijk gratis de handleiding van Parkside PWD 20 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PWD 20 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2884 MB |
