Parkside PWD 12 B2 handleiding
Handleiding
Je bekijkt pagina 19 van 57
17GB/IE/NI
NOTE
u The cloth filter bag[] and the paper filter
bag[] are suitable for dry vacuuming
only.
u Do not use the cloth filter bag[] for
vacuuming very fine dust or dirt (e.g.
sanding dust). The cloth filter bag can be
used for many other materials though.
Cloth filter bag[] (dry vacuuming)
Fig.L
Turn the container lid[2] over.
Install the cloth filter bag[] to the filter
basket[].
Pull down the rim of the cloth filter bag[]
until it covers the filter basket[] completely.
The rim of the cloth filter bag must reach and
touch the bottom surface of the filter basket.
Paper filter bag[] (dry vacuuming)
Fig.M
Turn the container lid[2] over.
Align the hole of the paper filter bag[] with
the internal suction connector[].
Press down the paper filter bag[] to insert
the internal suction connector [] into the hole
of the paper filter bag.
Press down the paper bag[] until the seal
ring[] is fitted into the circular slot[].
Foam filter[] (wet vacuuming)
Fig.N
Turn the container lid[2] over.
Install the foam filter[] to the filter
basket[].
Gently and slowly pull down the rim of
the foam filter[] until it covers the filter
basket[] completely. The rim of the foam
filter must reach and touch the bottom surface
of the filter basket.
Operation
Switching on/off
NOTE
u Before use, check if all parts are connected
securely and the container lid[2] is locked
in place.
u Before you connect the product to the
power supply, make sure it is switched off.
Fig.A
Connect the power plug[] with a suitable
socket-outlet.
Switching on: Press the on/off switch[5]
to positionI.
Switching off: Press the on/off switch[5]
to position0.
Storing the nozzles
Fig.O
Slide one end of the straight nozzle/ extension
tube[] or the crevice nozzle [] into the nozzle
holder on one of the swivel castors[] or into one
of the nozzle holders[] on the container lid [2].
Wrapping up the power cord
Fig.P
Wrap up the power cord[] around the
upper hook of the power cord holder[3]
and the lower swivel hook of the power cord
holder[7].
Fixing the power plug[]: Connect the
power cord clip[] to the wrapped up power
cord[].
Bekijk gratis de handleiding van Parkside PWD 12 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PWD 12 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5729 MB |
