Parkside PWD 12 B1 handleiding
Handleiding
Je bekijkt pagina 13 van 40
GB
IE
NI
13
Switching on
1. Move the On/Off switch (3) to the po-
sition “I” (ON).
Switching off
1. Move the On/Off switch (3) to the po-
sition “0” (OFF).
2. Pull the device plug out of the wall
socket if you are leaving the device un-
attended or if you have finished work-
ing.
Cleaning, maintenance
and storage
WARNING! Electric shock! Risk of in-
jury due to unintentional start-up. Protect
yourself when performing maintenance or
cleaning work. Switch off the device and
disconnect the mains plug from the socket.
You should have any repair and mainten-
ance work that is not described in these
instructions carried out by our Service
Centre. Only use original replacement
parts.
Cleaning
NOTICE! Risk of damage! Improper
cleaning can damage the device. Nev-
er spray down the device with water. Do
not use any abrasive cleaning agents or
solvents.
Emptying the dirt container
1. Mount the motor head.
Place the motor head (1) with the top
facing downward.
2. Empty the dirt container.
3. Mount the motor head.
General cleaning
1. Clean the dirt container (6) with a
damp cloth.
2. Wash the foam filter (15) with warm
water and soap and let it dry.
3. Tap out the contents of the textile filter
(16). If needed, wash it with warm wa-
ter and soap and let it dry.
4. When full, replace the paper filter bag
(17) (for reordering, see Spare parts
and accessories, p.17).
Maintenance
The device is maintenance free.
Storage
Always store the device and accessories:
• clean
• dry
• protected against dust
• out of the reach of children
Notes
• The dirt container is not suitable for
storing liquids. Empty the dirt container
after wet vacuuming.
Preparing the device for storage
(Fig.F)
1. Wind the power cord (10) around the
holders (24). Fix the power cable us-
ing the cable clip (11).
2. Insert the disassembled suction pipes
(12) into the accessory holders on the
feet (7).
3. Wind the suction hose (13) around
the device and plug the handle section
(14) into a suction pipe (12).
4. Insert the nozzles into the accessory
holders (4) on the motor head.
Bekijk gratis de handleiding van Parkside PWD 12 B1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PWD 12 B1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1367 MB |
