Parkside PWD 12 B1 handleiding

40 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 40
GB
IE
NI
11
Paper filter bag (17)
Dry vacuuming
Fine dust filter bag
Vacuuming fine dust
available as accessories
Removing the textile filter (Fig.D)
1. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
2. Remove the textile filer (16).
3. seeInstalling the foam filter (Fig.E);
Blowing, p.12
Installing the textile filter (Fig.D)
1. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
2. Remove the foam filter (15).
3. Pull the textile filter (16) completely
over the filter basket (21).
4. Mount the motor head.
5. Dry vacuuming, p.12; Vacuuming
fine dust, p.12
Installing the filter bag (Fig.D)
These instructions apply for the paper fil-
ter bag (17) and the fine dust filter bag
(available as accessories).
1. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
2. Inside the dirt container (6), pull the fil-
ter bag over the suction connector (5).
The sealing ring 22 on the filter bag
opening must fully surround the con-
nector (23) on the suction connector.
3. Mount the motor head.
Removing the filter bag (Fig.D)
1. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
2. You can remove the filter bag.
3. Mount the motor head.
Removing the foam filter (Fig.E)
1. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
2. Carefully remove the foam filter (15).
3. seeInstalling the textile filter (Fig.D);
Blowing, p.12
Installing the foam filter (Fig.E)
Only insert a dry filter.
1. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
2. Roll the foam filter (15) up a bit.
3. Pull the foam filter over the filter basket
(21).
4. Roll the foam filter so that it is smooth.
5. Mount the motor head.
6. Wet vacuuming, p.12
Inserting the nozzles
Floor nozzle (18) with insert at-
tachment (19)
Wet and dry vacuuming of smooth sur-
faces and carpeted floors
Floor nozzle (18) without insert at-
tachment (19)
NOTICE! Risk of damage! Be aware that
sensitive surfaces may be scratched if
working without the insert attachment.
Wet and dry vacuuming of carpeted
floors
Removing stubborn dirt
Removing the insert attachment
1. Push the tabs on the right and left of
the floor nozzle (18) and remove the
insert attachment (19).
Crevice nozzle (20)
Vacuuming joints, corners and radiators

Bekijk gratis de handleiding van Parkside PWD 12 B1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkParkside
ModelPWD 12 B1
CategorieNiet gecategoriseerd
TaalNederlands
Grootte1367 MB