Parkside PTI 380 C2 handleiding
Handleiding
Je bekijkt pagina 14 van 69
14 GB/IE/NI
Determine reference value
Press the measure button
3
and aim the laser pointer with 8 dot circle
1
at the area of which you wish to use the temperature as the reference.
The temperature is indicated in the display
5
.
Whilst holding the measure button, press the °C/°F/SET button
11
to
use the temperature value as the reference value. This temperature is indi-
cated
in the display next to „REF“ on the reference value display
6
.
Select tolerance range
You can set the temperature deviation from the reference value as of which the
product will respond with a visual and acoustic signal.
To
do so, whilst the reference value
6
appears in the display
5
, press
the
button
10
or the button
12
. Using this button the symbol will
move to the right (
) or to the left ( ) above the tolerance range selec-
tion
9
in the display.
Use this method to select the tolerance range indicated below the display:
Normal
0.5 °C
1°F
3 °C
5°F
5.5 °C
10°F
N
ote: Under “Normal“ mode, the tolerance range for temperature deviation
function is turned-off. So, no display color change/acoustic signal will be
observed for any amount of temperature deviation from reference value under
“Normal“ mode.
Scan temperature deviation
Select a reference temperature as described above.
Press the measure button
3
and aim the laser pointer with 8 dot circle
1
at the area you wish to measure. The temperature is indicated in the
display
5
.
Ho
ld the measure button whilst scanning, and slowly and steadily move
t
he laser pointer with 8 dot circle across the surface you wish to measure.
Bekijk gratis de handleiding van Parkside PTI 380 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PTI 380 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4243 MB |
