Parkside PTI 380 C2 handleiding
Handleiding
Je bekijkt pagina 12 van 69
12 GB/IE/NI
Switching on and off
Press measure button
3
or the ON/OFF button
13
to switch on the
product. The display
5
will light up and a brief tone will sound.
Press and hold the ON/OFF button
13
to switch off the product. Two
brief tones will sound.
When the product is no longer being used, the backlight of the display
will switch off after approx. 16 seconds. After approx. 60 seconds the
product will automatically switch off; this is indicated by two brief tones.
Selecting the temperature unit
After switching on, the last temperature unit used will initially be selected.
Briefly press the °C/°F/SET button
11
to change the temperature unit
7
(°C or °F).
The official temperature unit in Europe is °C.
Measuring temperature
Allow about 30 minutes for the product to acclimate to the conditions of the
environment.
Hold the measure button
3
whilst aiming the laser pointer with 8 dot
circle
1
at the surface you wish to measure.
The temperature is measured whilst pressing the measure button; the
display
5
will read „SCAN“.
After releasing the measure button the last temperature measured will
appear in the display and the laser pointer with 8 dot circle will be de-
activated.
The temperature determined is the average temperature of the area meas-
ured. The area measured is circular. The diameter of the area measured
„S“ is one twelfth of the distance between the surface and the infrared
sensor
2
„D“.
Bekijk gratis de handleiding van Parkside PTI 380 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PTI 380 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4243 MB |
