Parkside PSS 65 D1 handleiding
Handleiding
Je bekijkt pagina 11 van 56
8 GB/IE/NI/CY
Parts description
Fig. A
[1] Sharpener for knives and scissors
[2] Power cord with power plug
[3] On/off switch
[4] Spacer
[5] Magnet holder
[6] Tool table
[7] Retaining screw for angular adjustment
[8] Protective hood
[9] Mounting holes for work bench assembly
[] Grinding wheel
[] rotatable drill mount
[] Knurled nut for drill-fastening
[] Release lever for sharpener
[] Drill holder
[] Adjusting device
[] Grinding wheel nuts
Technical data
Sharpening station PSS 65 D1
Nominal
Input voltage: 220–240 V
~
, 50 Hz
Power consumption P: 65 W (S6 20%)*
Power consumption P
0
: 25 W (S1)**
Measurement idling
speed n
0
: 6700 min
-1
Safety class:
II
Weight (incl.
accessories): approx. 1.26kg
Grinding angle range: 15° - 50°
Sharpness drill
diameter: 3 -10 mm
Sharpness knife width: 6 - 51 mm
Grinding wheel
Outer diameter: Ø 49.5 mm
Borehole diameter: Ø 10.14 mm
Thickness: 7.9 mm
Abrasive: Diamond
Base body: Metal
Working speed: max. 60 m/s
Rotational speed: max. 23100 min
-1
Sound pressure level
(L
pA
): 60.4dB; K
pA
= 3dB
Sound power level
(L
WA
): 73.4dB; K
WA
= 3dB
* Operating mode S6 20%: Continuous
operation with intermittent load (cycle time
10 min). In order not to heat the motor.
more than permitted, the motor may only
be operated for 20% of the cycle time with
the stated nominal power and must then
continue running for 80% of the cycle time
without a load.
** Operating mode S1: Continuous operation
with constant load
Bekijk gratis de handleiding van Parkside PSS 65 D1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PSS 65 D1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5685 MB |
