Parkside PRM 1800 B2 handleiding
Handleiding
Je bekijkt pagina 17 van 44
17
NIIEGB
I
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment
does not start
Power is off
Check the socket, cable, wire
and plug and have any repairs
carried out by an electrician
Defective start lever
(
A
15)
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Set a greater cut height. Lift the
front wheels slightly by pressing
down on the handle bar.
Motor stops Blockage by foreign object Remove the foreign object
Result unsatis-
factory or mo-
tor labours
Cut height too low Set a higher cut height
Blade (19) blunt
Have the blade (19) sharpened
or replace it
Blade (19) area blocked Clean the equipment
Blade (19) assembled incor-
rectly
Install the blade (19) correctly
Blade (19)
fails to turn
Blade (19) blocked by grass Remove the grass
Blade screw (18) loose Tighten the blade screw (18)
Strange nois-
es, rattling or
vibrations
Blade screw (18) loose Tighten the blade screw (18)
Blade (19) damaged Replace the blade (19)
Level indicator
(
E
17) does
not work
Contamination
Cleaning with a soft brush. The
level indicator must close by
itself, if it was opened.
Replacement parts / Accessories
Spare parts and accessories can be obtained at www.grizzlytools.shop
If you have issues ordering, please use the contact form.
If you have any other questions, contact the ”Service-Center” (see page
19).
Item Item Description Order number
Instruction Exploded
Manual Drawing
4 Grass bag 91105232
19 11 Spare blade (manufacturer’s designation:
GL01BX.00.06.X1.01.X) 13700303
Bekijk gratis de handleiding van Parkside PRM 1800 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PRM 1800 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6462 MB |
