Parkside PRM 1800 B2 handleiding
Handleiding
Je bekijkt pagina 10 van 44
10
GB IE NI
Work only in daylight or with
good lighting.
Accident hazard!
• Do not work with
the equipment
when tired, lacking concentra-
tion or u
nder the infl uence of
alcohol or drugs. Always take
breaks in good time. Take a
sensible approach to the work.
A moment of carelessness when
using the equipment can result
in serious injury.
• When working, ensure a fi rm
stance, particularly on slopes.
This enables you to control the
equipment better in unexpected
situations.
Always work across the slope,
never upwards or downwards.
Take particular care when
changing the direction of travel
on the slope. Do not work on
excessively steep slopes.
• Run the equipment only at a
walking pace. Take particular
care when turning the equip-
ment around, pulling it towards
you or going backwards.
There is a risk of personal inju-
ry.
• Switch on the equipment care-
fully and in accordance with
the directions in these instruc-
tions. Ensure suffi cient distance
between feet and the rotating
blades. Contact with the cutter
can result in injury.
• When starting or turning the
motor on, the lawnmower
must not be tilted, unless it is
required to lift the lawnmower
in the process.In doin
g so, tilt it
only as far as absolutely neces-
sary and lift it only on the side
facing away from the user. In
this case, tilt the equipment by
pressing down the handle bar
such that the front wheels of the
equipment are raised. Always
check that both hands are in
the working position before
returning the equipment to the
ground.
• Do not work without the grass
bag or collision guard. Keep
away from the ejection hole at
all times.
• Do not start the motor when
standing in front of the emission
duct.
Caution! Danger! The blade
continues to run after switching
off. There is a risk of injury.
• The equipment is not to be lifted
or transported while the motor
is running. Switch off the equip-
ment if it has to be tilted in
transit, when crossing surfaces
other than grass, and when the
equipment is being transported
to and from the surfaces to be
mowed.
• Always keep the grass ejection
hole clean and clear. Remove
cut material only when the
equipment is stopped.
• Do not leave the equipment un-
attended in the workplace.
• Do not work with equipment
that is damaged, incomplete, or
has been modifi ed without the
authorisation of the manufac-
turer. Do not use the equipment
with damaged safety devices or
screens or with missing safety
equipment such as defl ection
Bekijk gratis de handleiding van Parkside PRM 1800 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PRM 1800 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6462 MB |
