Parkside PPWSA 12 A1 handleiding
Handleiding
Je bekijkt pagina 8 van 228
PPWSA 12 A1
GB
│
IE
│
3 ■
Package contents
1 12V cordless angle grinder
1 blade guard (pre-assembled)
1 hex key
1 cutting disc (pre-assembled)
1 blade guard with dust extraction
1 carrying case
1 set of operating instructions
Technical data
Cordless Angle Grinder
Rated voltage 12 V (DC)
Idle speed n
0
20000 rpm
Disc size Ø 76 mm
Thickness of cutting disc 1 mm
Bore Ø 10 mm
Thread M6
* BATTERY AND CHARGER ARE NOT SUPPLIED
The appliance is part of the Parkside
series and can be operated using Parkside
batteries.
Batteries from the Parkside series may
only be charged using Parkside series
chargers.
We recommend that you only operate this appli-
ance with the following batteries: PAPK 12 A1/
A2/A3/B1/C1/D1/PAPK 12 2.5/5.0 A1.
We recommend that you charge these batteries
with the following chargers: PLGK 12 A1/A2/A3/
B2/PLGK 12 6.0 A1/PDSLG 12 A1.
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 62841. The A-weighted noise level
of the power tool is typically as follows:
Noise emission value
Sound pressure level L
PA
= 83.1 dB
Uncertainty K = 3 dB
Sound power level L
WA
= 91.1 dB
Uncertainty K = 3 dB
Wear ear muffs!
Total vibration value
Surface grinding, main handle a
h, AG
= 2.853 m/s
2
Uncertainty K = 1.5 m/s
2
Noise and vibration data
Noise measurement value determined in accord-
ance with EN60745-2-22. The A-weighted noise
level of the power tool is typically as follows:
Noise emission value
Sound pressure level L
PA
= 89 dB
Uncertainty K = 3 dB
Sound power level L
WA
= 97 dB
Uncertainty K = 3 dB
Wear ear muffs!
Total vibration value
Surface grinding, main handle a
h
= 2.82 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
► The vibration emission values and noise emis-
sion values given in these instructions have
been measured in accordance with a stand-
ardised test procedure and can be used for
comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
► It is necessary to establish safety measures to
protect the operator based on an estimation
of the vibration load during actual use
(wherein all states of operation must be
included, e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
Bekijk gratis de handleiding van Parkside PPWSA 12 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PPWSA 12 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25421 MB |
