Parkside PPTLBA 40-Li C3 handleiding
Handleiding
Je bekijkt pagina 8 van 227
PPTLBA 40-Li C3
■ 4
│
GB
│
IE
Noise and vibration data
Noise measurement value determined in accord-
ance with
2000/14/EC & 2005/88/EC
. The
A-rated noise level of the power tool is typically as
follows:
Noise emission value
Sound pressure level L
PA
= 73.6 dB
Uncertainty K = 3 dB
Sound power level L
WA
= 91.7 dB
Guaranteed 96 dB
Uncertainty K = 2.08 dB
Wear ear muffs!
Total vibration value
Vibration at handle
a
h,
< 2.5 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
►
The vibration emission values and noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
► Safety measures to protect the operator must
be established based on an estimation of the
vibration load during actual use (wherein all
states of operation must be included, e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
Safety information
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool.Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Bekijk gratis de handleiding van Parkside PPTLBA 40-Li C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PPTLBA 40-Li C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25643 MB |
