Parkside PPTLBA 40-Li C3 handleiding

227 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 19 van 227
PPTLBA 40-Li C3
GB
IE
 │
 15
Working with the appliance
WARNING!
The leaf blower may only be used for the
following purposes:
As a blower for piling up dry foliage or
blowing it out of hard-to-reach places.
When working, take care not to hit the
appliance against hard objects that could
cause damage.
You will achieve optimum results when using
the blower at a distance of 5 - 10 cm from the
ground.
Direct the air jet away from you. Be careful not
to stir up any heavy objects that could injure
someone or damage something.
Start work with the highest blowing power to
quickly collect the leaves lying around. Select a
lower blowing power to compact the previously
collected pile of leaves.
Use a broom or rake to loosen any leaves
adhering to the ground before blowing.
Hold the appliance by the handle 1 when
working.
Working with the blower pipe and attach-
ment/flat nozzle (see Fig. B)
With the blower pipe 4 and attachment 6, you
can collect leaves over a wider area. The flat
nozzle u acts as a turbo nozzle. You can
achieve the highest air speed with this nozzle.
Cleaning and maintenance
WARNING!
Danger due to moving parts! Switch off the
appliance before carrying out any mainte-
nance work and remove the batteries from
the appliance.
Have all repair and maintenance work not
described in these instructions carried out by
our Service Centre or a qualified electrician.
Only use original replacement parts.
Before each use, check the appliance for any
defects or damage, such as loose, worn or
damaged parts.
Carry out maintenance and cleaning work
regularly.
Many faults and accidents are due to inade-
quate maintenance and care.
RISK OF ELECTRIC SHOCK!
Do not immerse the appliance in water or
other liquids and do not spray it with water to
clean it.
Keep the ventilation slots, motor housing and
handles of the appliance clean. Use a damp
cloth or brush for this purpose. Do not use
cleaning agents or solvents. This could cause
irreparable damage to the appliance.
Storage
Keep the cleaned appliance in a dry and dust-
free place and always out of the reach of
children.
You can remove the blower pipe 4, the attach-
ment 6 and the flat nozzle u from the motor
housing 3 for storage (see the corresponding
assembly instructions in the section “Fitting/
removing the blower pipe and flat nozzle”).
There is a mount p on the underside of the
appliance, which can be used to hang the
appliance on the wall using a screw/nail
(Ø 7-10 mm) (Fig. C)

Bekijk gratis de handleiding van Parkside PPTLBA 40-Li C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkParkside
ModelPPTLBA 40-Li C3
CategorieNiet gecategoriseerd
TaalNederlands
Grootte25643 MB