Parkside PPM 800 A1 handleiding
Handleiding
Je bekijkt pagina 5 van 28
PPM 800 A1
■ 2
│
GB
│
IE
│
NI
CAR POLISHER SPOT REPAIR
PPM 800 A1
Introduction
Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all instructions
regarding safety and use. Use the product only
as described and for the specifi ed range of appli-
cations. Please also pass on all documents to any
future owner.
Intended use
The appliance is suitable for polishing paintwork,
coatings, plastics and other smooth surfaces. Any
other usage or modifi cation of the appliance is
deemed to be improper and carries a signifi cant
risk of accidents. The manufacturer accepts no
responsibility for damage(s) resulting from improper
usage. This appliance is intended for domestic use
only.
Features
1 ON/OFF switch
2 Speed control
3 Additional handle
4 Polishing disc
5 Polishing pad
6 Thread
7 Spindle lock
Package contents
1 car polisher spot repair
1 polishing disc Ø 75 mm
1 foam polishing pad Ø 80 x 25 mm
1 additional handle
1 set of operating instructions
Technical specifi cations
Rated voltage 230 V ∼, 50 Hz
(AC)
Rated power 800 W
Rated idle speed n
0
1300 - 3900 rpm
Thread M14
Protection class II /
(double insulation)
Noise and vibration data
Noise measurement value determined in accor-
dance with EN62841. The A-rated noise level of
the tool is typically
Sound pressure level 87 dB
Sound power level 95 dB
Uncertainty K 3 dB
Wear ear muff s!
Rated acceleration, typically:
Hand/arm vibration a
h
= < 2.5 m/s
2
Uncertainty K = 1.5 m/s
2
Wear safety goggles!
Always operate the power tool with
both hands.
NOTE
► For an accurate estimate of the vibration load
during a specifi c working period, the periods
during which the appliance is switched off or
is running but not actually being used must
also be taken into consideration. This can
signifi cantly reduce the vibration load over
the total working period.
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
IB_449752_PPM800A1_LB6.indb 2 21.03.2024 11:06:26
Bekijk gratis de handleiding van Parkside PPM 800 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PPM 800 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2833 MB |
