Parkside PMFW 310 E3 handleiding

114 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 114
PMFW 310 D2
8 
GB
IE
HCS/HSS
HCS
HCS
C
C
C
A1
Scraper Z52 A1
Materials
mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application
removal of material residues, such as tile
adhesive, when replacing damaged tiles
Changing tools
NOTE
If you plan to use the dust collection unit, it
must be connected before fitting or changing
the tool (see section “Connecting a dust
extraction device”).
WARNING! RISK OF INJURY!
Always remove the plug from the power
socket before working on the power tool.
Check that the tool is fitted firmly. Incorrectly or
insecurely fitted tools can come loose during
use and cause you an injury.
If necessary, remove an already fitted tool.
To do this, raise the tool release lever
.
Fit the tool (e.g. the plunge saw blade
) onto
the tool holder.
NOTE
You can fit the tools in any snap position on
the tool holder.
Lock the tool into place by pushing the tool
release lever
back down again.
Fitting the sanding sheet onto
thesanding plate
Attaching
Sanding sheets
are attached to the sanding
pad by means of the hook and pile
fastening.
NOTE
Before fitting a new sanding sheet
, remove
any dust and dirt from the sanding pad .
Note that the holes for dust extraction from
sanding sheet
and sanding pad are
aligned.
Position the sanding sheet
flush on one side
of the sanding pad , then place the sanding
sheet on the sanding plate.
Operation
Switching on and off
Switching on
Push the ON/OFF switch
forwards to switch
the appliance on.
Switching off
Push the ON/OFF switch
backwards to
switch the appliance off.

Bekijk gratis de handleiding van Parkside PMFW 310 E3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkParkside
ModelPMFW 310 E3
CategorieNiet gecategoriseerd
TaalNederlands
Grootte11828 MB