Parkside PLSBA 40-Li A1 handleiding
Handleiding
Je bekijkt pagina 12 van 56
GB
12
by vibration. You can however
extend your machine use time
by wearing appropriate gloves
or by taking regular breaks.
• Avoid operating the machine in
poor weather conditions, espe-
cially when there is a lightning
hazard. Only work in daylight
or where there is good articial
illumination.
• Do not vacuum burning, glow-
ing or smoking materials (e.g.
cigarettes, embers etc.), vapours
or highly ammable, toxic or ex-
plosive substances.
• Stop the machine and remove
the batteries from the device.
Ensure that all moving parts are
at a full standstill:
- when you are not using the
device or when you are
transporting or leaving it unat-
tended;
- before removing any obstruc-
tion or blocked channels,
- before checking, cleaning or
carrying out other work on
the machine.
- after contact with foreign bod-
ies or if abnormal vibration
occurs.
• Do not use the device in a
closed or poorly ventilated area.
• Do not use the device near am-
mable liquids or gases. There is
a risk of re or explosion if this
advice is not heeded.
• In the case of an accident or
malfunction during operation,
the device must be switched off
immediately and the batteries
removed. Read the “Trouble-
shooting” section to correct
any malfunctions or contact our
Service Centre.
• Walk at a steady pace, do not
run.
• Ensure that the in-feed is empty
prior to starting the machine.
• Keep your face and body away
from the in-feed aperture.
• Do not allow hands or other
body parts or clothing to enter
the in-feed or discharge chute,
or to be in the vicinity of moving
parts.
• Do not allow processed material
to accumulate in the discharge
zone, as this can prevent proper
discharge and cause the mate-
rial to be brought back through
the in-feed opening.
• When feeding material into the
machine, pay special attention
not to feed in any metal parts,
stones, bottles, cans or other for-
eign bodies.
• Do not tilt the machine while the
power source is running.
• Ensure you are standing securely
and do not lose your balance.
Avoid an abnormal work pos-
ture. When material is being
taken in by the machine, never
stand on a higher level than the
base of the machine.
• Do not stand within the ejection
zone while operating the machine.
• Take extreme care when feeding
material into the machine to en-
sure no metallic objects, stones,
bottles, canisters or other foreign
objects are taken in.
• Do not allow processed mate-
rial to accumulate in the ejection
zone since this can prevent prop-
Bekijk gratis de handleiding van Parkside PLSBA 40-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PLSBA 40-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7317 MB |
