Parkside PHSL 710 A1 handleiding
Handleiding
Je bekijkt pagina 5 van 64
GB
5
Intended Use
The equipment is specied for use only for
the cutting and trimming of hedges, bushes
and ornamental shrubs in the domestic
environment. Any other use that is not ex-
plicitly approved in these instructions may
result in damage to the equipment and
represent a serious danger to the user.
The equipment is designed for use by
adults. Adolescents over the age of 16
may use the device only under supervision.
Local regulations may specify an age limit
for the user. Do not use the hedge trimmer
in the rain or on wet hedges.
The operator or user is responsible for ac-
cidents or damage to other people or their
property. The manufacturer is not liable
for damages caused by unspecied use or
incorrect operation. This equipment is not
suitable for commercial use. Commercial
use will invalidate the guarantee.
Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt,
in order to avoid overstressing of
the machine. Damages caused by
cutting with blunt blades are not
covered by the guarantee.
General Description
The illustration of the principal
functioning parts can be found
on the front and back foldout pages.
Extent of delivery
- Long-handled hedge trimmer (three-part)
- Blade protection
- Shoulder strap
- Round handle
- Protective goggles
- 3 x star knob
- Instruction manual
Overview
A
1 Safety blade
2 Gearbox
3 Safety lever
4 Stop lever
5 Handle for adjusting the blade
beam
6 Front tubular shaft
7 Safety button, front tubular shaft
8 Pivotal centre,
middle tubular shaft
9 Middle tubular shaft
10 Safety button, tubular shaft on the
appliance housing
11 Pivotal centre, tubular shaft on the
appliance housing
12 Tubular shaft on the appliance
housing
13 Round handle, front handle
14 Safety slide
15 Safety switch
16 On/off switch (not visible)
17 Mains cable
18 Cable strain relief (not visible)
19 Shoulder strap
20 Eye (for shoulder strap)
21 Blade protection
22 Protective goggles
B
23 Covering cap
C
24 Counter-holder
25 Washer
(pivotal centre round handle)
26 Pivotal centre (round handle)
27 Soft grip
28 Screw, carrying eye
29 Keyhole bore
Bekijk gratis de handleiding van Parkside PHSL 710 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PHSL 710 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7485 MB |
