Parkside PHSHE 900 A1 handleiding
Handleiding
Je bekijkt pagina 23 van 56
23
NIIEGB
Trouble Shooting
Problem Possible cause Fault correction
Device does not
start
Mains voltage not on
Check plug socket, cable, line
and plug, where appropriate,
have repaired through electrical
specialist
On/Off switch (
A
13) defective
Repair by Service Centre
Worn carbon brushes
Defective motor
Device runs with
interruptions
Power cable is damaged
Check the cable and have it
changed by the Service Centre
if necessary
Internal loose electrical connection
Repair by Service Centre
On/Off switch (
A
13) defective
Blades become hot
Blades (
A
1) are blunt
Have the blades (
A
1)
sharpened or replaced (Service
Centre)
Blades (
A
1) are notched
Have the blades (
A
1) checked
or replaced (Service Centre)
Too much friction due to lack of
lubrication
Oil the blades (
A
1)
Saw is having
chain jumps off
Check chain tension
Chain gets hot,
smoke develops
while sawing,
the rail changes
colour
Too little chain oil
chain oil as needed
Check the oil automation and
needed, or arrange for repair
by customer service
Bad cutting output
Saw chain (20) blunt/blade (1)
blunt
Sharpen or replace saw chain /
regrind or replace blade bar (1)
(service centre)
Check chain tension
Bekijk gratis de handleiding van Parkside PHSHE 900 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PHSHE 900 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7479 MB |
