Parkside PGSA 4 B3 handleiding
Handleiding
Je bekijkt pagina 6 van 138
6
GB CY
Sound pressure level (L
pA
)
Function as
grass shears ...........67,1 dB; K
pA
= 3 dB
shrub shears ........... 66,9 dB; K
pA
= 3 dB
Sound power level (L
WA
)
guaranteed ...............................77 dB
measured, Function as
grass shears ....... 75,1 dB; K
WA
= 2,09 dB
shrub shears ..... 74,9 dB; K
WA
= 2,03 dB
Vibration (a
h
)
at handle, Function as
grass shears ..1,352 m/s
2
; K= 1,5 m/s
2
shrub shears ....2,63 m/s
2
; K= 1,5 m/s
2
Temperature (device & battery) ...max. 50°C
Charging process .................. 4 - 40°C
Operation ..........................-20 - 50°C
Storage ................................ 0 - 45°C
Battery (Li-Ion) ............................Li-Ion
Nominal voltage .............. 4 V
; 2 Ah
Power supply unit ..........................
................ WJG-Y130502200WU1/
...................WJB-Y130502200WU1
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
DE-63762 Großostheim
HRA: 5468, Amtsgericht Aschaffenburg
Input voltage ............................100-240 V~;
Input AC frequency .......................50-60 Hz
Power input ................................. 25 W
Rated output ................................ 5 V
Output current .........................2200 mA
Output power ............................ 11.0 W
Average active efciency ............. 83.4 %
Efciency at low load (10%) ......... 80.6 %
Power consumption at zero load 0.065 W
Protection class ...............................
II
Protection category...........................IPX0
The noise and vibration levels have been
calculated according to the norms stated in
the conformity statement.
The specied noise emission value has been
measured according to a standardised
testing method and may be used for compa-
rison with another power tool. The specied
noise emission value can also be used for a
provisional assessment of the load.
Warnung: -The vibration emission
value may differ during actual use
of the power tool from the stated value de-
pending on the manner in which the power
tool is used.
Try to keep the exposure to vibrations as
low as possible. Examples of measures to
reduce vibration exposure are the wearing
of gloves when using the tool and limiting
the working hours. For this purpose all parts
of the operating cycle have to be consi-
dered (for example, times when the electric
tool is switched off and times when it is swit-
ched on but running without any load).
Safety Instructions
This unit can cause serious
injury if not used correctly.
Before using the unit, carefully
read through the instruction manu-
al and familiarise yourself with all
of its controls.
Symbols
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
There is a risk of injury from
electric shock.
Instruction symbols with information
on preventing damage.
Bekijk gratis de handleiding van Parkside PGSA 4 B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PGSA 4 B3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18298 MB |
