Parkside PEXS 480 A1 handleiding
Handleiding
Je bekijkt pagina 8 van 26
PEXS 480 A1
GB
│
IE
│
NI
│
5 ■
5. Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Plugs and power cords should only be re-
placed by the manufacturer of the power tool
or the manufacturer's authorised customer
service agent. This will ensure that the safety of
the power tool is maintained.
Appliance-specific safety instructions
■ Secure the workpiece. A workpiece that is se-
curely held in place by a clamping device or
vice is much safer than one held in your hand.
■ Do not rest your hands next to or in front of the
appliance and the area being worked as there
is a risk of injury if you slip.
■ In the event of danger, remove the mains plug
from the socket immediately.
■ Always route the power cord towards the rear,
away from the appliance.
■ RISK OF FIRE DUE TO FLYING SPARKS!
Sanding metal causes sparks. Ensure that no-
body can be put at risk and that no combustible
materials are located in the immediate vicinity
of where you are working.
■ Hold the power tool by the insulated gripping
surfaces, as the grinding surface could hit its
own cable. Damage to a live wire may make
exposed metal parts of the power tool live and
could give the operator an electric shock.
WARNING! TOXIC VAPOURS!
► Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area.
WARNING!
RISKS DUE TO DUST!
► When working for extended periods of time
on wood and, in particular, materials that
produce dust which is hazardous to health,
connect the appliance to an appropriate
external dust extraction appliance. Wear
safety goggles and a protective dust mask!
■ Provide sufficient ventilation when working on
plastics, paints, lacquers, etc.
■ Do not soak the materials or the area to be
processed with liquids containing solvents.
■ Never work on moistened materials or damp
surfaces.
■ Avoid sanding lead paint or other harmful
materials.
■ Do not process materials containing asbestos.
Asbestos is a known carcinogen.
■ Avoid contact with the sanding sheet while the
appliance is running.
■ Do not use the appliance without a sanding
sheet fitted.
■ Never use the appliance for purposes other
than those for which it was designed, and only
use original parts/accessories. Using attach-
ments or accessory tools other than those rec-
ommended in the operating instructions can
lead to a risk of injury.
■ Always allow the appliance to come to a
complete standstill before putting it down.
■ The appliance must always be kept clean,
dry and free from oil or grease.
Before use
Selecting a sanding sheet
Removal and surface
The material removal rate and surface quality are
determined by the grain strength of the sanding
sheet.
♦ Please note that you need to use appropriate
sanding sheets with different grains for working
different materials.
Bekijk gratis de handleiding van Parkside PEXS 480 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PEXS 480 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2741 MB |
