Parkside PEX 270 C3 handleiding
Handleiding
Je bekijkt pagina 5 van 26
PEXS 270 C3
■ 2
│
GB
│
IE
│
NI
Introduction
Congratulations on the purchase of your new
appliance. You have selected a high-quality prod-
uct. The operating instructions are part of this
product. They contain important information about
safety, usage and disposal. Before using the prod-
uct, please familiarise yourself with all instructions
regarding safety and use. Use the product only as
described and for the specified range of applica-
tions. Please also pass on all documents to any
future owner.
Intended use
The appliance is suitable for sanding wood, metal
and paint.Any other use of or modification to the
appliance is deemed to be improper and carries
the risk of serious personal injury. The manufacturer
accepts no responsibility for damage(s) attributa-
ble to misuse. This appliance is not intended for
commercial use.
Features
1 ON/OFF switch
2 Dust box
3 Sanding pad
4 Sanding sheet
5 Speed control
6 Exhaust nozzle
7 Adapter for external dust extraction
8 Sanding sheet alignment tool
Package contents
1 orbital sander PEXS 270 C3
1 dust box
2 sanding sheets (grain 80 + 120)
1 sanding sheet alignment tool
1 adapter for external dust extraction
1 set of operating instructions
Technical data
Rated voltage 230 V ∼, 50 Hz
(AC)
Rated power 270 W
Idle oscillation speed 14000–24000 rpm
Idle speed n
0
7000–12000 rpm
Sanding pad Ø 125 mm
Protection class II /
(double insulation)
Noise and vibration data
Noise measurement value determined in accord-
ance with EN62841. The A-rated noise level
of the power tool is typically:
Sound pressure level L
PA
= 79 dB
Uncertainty K = 3 dB
Sound power level L
WA
= 90 dB
Uncertainty K = 3 dB
Wear ear muffs!
Vibration values (vector sum of three directions)
determined in accordance with EN 62841:
Vibration emission value max. a
h, W
= 9.7 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
WARNING!
► Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
Bekijk gratis de handleiding van Parkside PEX 270 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PEX 270 C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2700 MB |
