Parkside PDZ 349 A1 handleiding
Handleiding
Je bekijkt pagina 1 van 3
FR/BE FR/BE FR/BE GB/IE/NI
[ ]
1x Clé plate (9,5mm)
[ ]
6x Disque abrasif vert au carbure de silicium (Ø 20mm)
[ ]
6x Disque abrasif en oxyde d'aluminium rose (Ø 20mm)
[ ]
1x Broche de meulage (Ø 12,7mm)
[ ]
1x Broche de meulage (Ø 6,35mm)
[ ]
3x Brosse en laiton (A3 acier + laiton)
[ ]
3x Brosse en acier inoxydable (A3 acier + acier inoxydable)
[ ]
4x Broche de meulage en caoutchouc
[ ]
1x Broche de meulage en lamelles (corindon)
[ ]
3x Broche de meulage en oxyde d'aluminium
[ ]
3x Fraise HSS (Ø 3,17mm)
[ ]
3x Broche de meulage en carbure de silicium vert
Description des pièces
[1]
2x Disque en textile (Ø25 mm)
[2]
8x Disque en feutre (Ø12mm)
[3]
4x Disque en feutre (Ø 25mm)
[ ]
20x Petite bande abrasive (Ø 6,35 mm)
[ ]
10x Grande bande abrasive (Ø 12,7 mm)
[5]
1x Disque émeri en caoutchouc (Ø 22mm)
[6]
135x Disque abrasif (Ø 20mm)
[7]
1x Pâte de polissage (10 g)
[8]
108x Disque à tronçonner (Ø 24mm)
[9]
2x Pointe en feutre (10 x 19mm)
[ ]
2x Disque abrasif de découpe: Fibre de verre (Ø 32mm)
[ ]
1x Pierre de dressage (L 25 x l 9,5 x H 9,5 mm)
Introduction
Nous vous félicitons pour l‘achat de votre nouveau produit. Vous avez opté pour
un produit de grande qualité. Avant la première mise en service, vous devez
vous familiariser avec toutes les fonctions du produit. Veuillez lire attentivement
le mode d’emploi ci‑dessous et les consignes de sécurité. N’utilisez le produit
que pour l’usage décrit et les domaines d’application cités. Conserver ces
instructions dans un lieu sûr. Si vous donnez le produit à des tiers, remettez‑leur
également la totalité des documents.
Utilisation conforme aux prescriptions
Ce produit est destiné aux applications suivantes:
– Percer
– Fraisage
– Gravure
– Polissage
– Nettoyage
– Meulage
– Tranchage
Matières: Bois, plastique et métal
Ce produit n’est pas destiné à un usage commercial ou industriel. Aucune
responsabilité n’est assumée en cas d’utilisation inappropriée.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose
of your worn‑out product.
Service
Service Great Britain
Tel.: 0800 0569216
E‑Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
Service Northern Ireland
Tel.: 0800 0927852
E‑Mail: owim@lidl.ie
GB/IE/NI
GB/IE/NI
GB/IE/NI
GB/IE/NI
GB/IE/NI
GB/IE/NI
GB/IE/NI
GB/IE/NI
GB/IE/NI
GB/IE/NI
GB/IE/NI
[ ]
4x Polished HSS twist drill
2x Polished HSS twist drill (Ø 1.6 mm)
1x Polished HSS twist drill (Ø 2.4 mm)
1x Polished HSS twist drill (Ø 3.2 mm)
[ ]
8x Diamond grinding bit
[ ]
4x Collet chrome plated
2x Collet chrome plated (Ø 3.2 mm)
1x Collet chrome plated (Ø 1.6 mm)
1x Collet chrome plated (Ø 2.4 mm)
[ ]
1x Mandrel for felt wheel
[ ]
1x Mandrel for cloth wheel
[ ]
2x Mandrel for cut off wheel
Use
m
CAUTION! RISK OF INJURY! It is essential that you read the instruction
manual that belongs to your rotary tool before you start using the product. If
you do not observe this advice, this can lead to serious injuries.
Selecting the appropriate accessory
Drilling
[ ] Polished HSS twist drill
[ ] Collet chrome plated
Drilling into wood
Milling
[ ] HSS cutter
[ ] Diamond cutter
[ ] Collet chrome plated
Various tasks, e.g. hollowing out,
gouging, shaping, grooving or
slotting
Introduction
We congratulate you on the purchase of your new product. You have chosen
a high quality product. Familiarise yourself with the product before using it for
the fi rst time. In addition, please carefully refer to the operating instructions and
the safety advice below. Only use the product as instructed and only for the
indicated fi eld of application. Keep these instructions in a safe place. If you
pass the product on to anyone else, please ensure that you also pass on all the
documentation with it.
Intended use
This product is designed for the following tasks:
– Drilling
– Milling
– Engraving
– Polishing
– Cleaning
– Sanding
– Cutting
Suitable materials: Wood, plastic and metal
This product is not intended for commercial or industrial use. No liability will
be assumed in case of improper use.
General safety instructions
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE!
WARNING! DANGER OF DEATH AND ACCIDENTS FOR
TODDLERS AND CHILDREN! Never leave children unsupervised with the
packaging material. The packaging material represents a danger of suff ocation.
Children frequently underestimate the dangers. Always keep children away from
the packaging material.
Some of the supplied tools can be swallowed. If a part is swallowed, seek
medical advice as soon as possible.
This product is not a toy. It does not belong in the hands of children.
Children do not appreciate the dangers associated with the product.
Engraving
[ ] Diamond cutter
[ ] Collet chrome plated
Marking, detailed work
Polishing, Derusting
[ ] Stainless steel brush
Derusting
[3] Felt wheel
[7] Polish compound
[ ] Rubber grinding pin
[ ] Collet chrome plated
[ ] Mandrel for felt wheel
Various metals and plastics, in
particular precious metals
Cleaning
[ ] Brass brush
[ ] Collet chrome plated
e.g. metal
Description of parts
[1]
2x Cloth wheel (Ø 25 mm)
[2]
8x Felt wheel (Ø 12 mm)
[3]
4x Felt wheel (Ø 25 mm)
[ ]
20x Small sanding band (Ø 6.35 mm)
[ ]
10x Large sanding band (Ø 12.7 mm)
[5]
1x Rubber emery wheel (Ø 22 mm)
[6]
135x Sanding disc (Ø 20 mm)
[7]
1x Polish compound (10 g)
[8]
108x Cutting disc (Ø 24 mm)
[9]
2x Felt wheel point (10 x 19 mm)
[ ]
2x Cut off wheel: Fiber glass (Ø 32 mm)
[ ]
1x Dressing stone (L 25 x W 9,5 x H 9.5 mm)
Children or persons who lack the knowledge or experience to use the
product or whose physical, sensory or intellectual capacities are limited must
never be allowed to use the product without supervision or instruction by a
person responsible for their safety. Children must never be allowed to play
with the product.
m
CAUTION! RISK OF INJURY! Do not use the product if you see it is
damaged in any way.
Unplug the you rotary tool before fi tting or changing tools.
Check whether all of the parts are correctly fi tted. Use the wrench
[ ]
if necessary to tighten or loosen the collet nut on your rotary tool. If the
product is not correctly assembled, there is a risk of injury.
CAUTION! RISK OF INJURY! Always wear protective goggles
when working with the product.
Grinding/abrading
[ ] Small sanding band
[ ] Large sanding band
[ ] Dressing stone
[ ] Sanding shank
[ ] Sanding shank
[ ] Flap pin (Corundum)
[ ] Aluminium oxide grinding pin
[ ] Silicon carbide grinding pin
[ ] Collet chrome plate
[ ] Mandrel for cut off wheel
Grinding of stone, precise tasks
on hard materials, such as
ceramics or alloy steel
Cutting
[8] Cutting disc
[ ] Cut off wheel
[ ] Collet chrome plate
[ ] Mandrel for cut off wheel
Cutting metal, plastic and wood
[ ]
1x Wrench (9.5 mm)
[ ]
6x Green silicon carbide grinding wheel (Ø 20 mm)
[ ]
6x Pink aluminium oxide grinding wheel (Ø 20 mm)
[ ]
1x Sanding shank (Ø 12.7 mm)
[ ]
1x Sanding shank (Ø 6.35 mm)
[ ]
3x Brass brush (A3 steel + brass)
[ ]
3x Stainless steel brush (A3 steel + stainless)
[ ]
4x Rubber grinding pin
[ ]
1x Flap pin (Corundum)
[ ]
3x Aluminium oxide grinding pin
[ ]
3x HSS cutter (Ø 3.17 mm)
[ ]
3x Green silicon carbide grinding pins
Never exceed the specifi ed maximum rotation speed (see illustrations).
The product may not be fi tted to rotary tools whose rotational speed lies
above the maximum rotational speed permitted for the product.
Rust discolouration or other signs of chemical or mechanical change to the
product can cause premature failure of the product.
All product parts must be stored in the container in which they were
delivered to protect them from the following factors:
– High humidity, heat, water or other liquids which could cause damage to
the product;
– Acids or vapours of acids, which could cause damage;
– Temperatures that are so low that they could lead to condensation when
the product is relocated to an area with higher temperatures;
– Deformation of a part.
NOTE: If the sanding band [ ] [ ] is slack: Turn the screw on the head
of the sanding shank
[ ] [ ] in a clockwise direction. Use a crosshead
screwdriver. Turn until the sanding band is tight.
Cleaning and care
Use a soft and dry brush to clean the product.
Storage
The product must be stored in the container in which it was delivered to
protect the product from external factors.
Always place the container’s plastic insert in the container before replacing
the lid to ensure that the product sits securely in the container.
[ ]
[ ] [ ]
[ ] [ ] [ ]
[ ] [ ] [ ] [ ]
[9000–35000
min
–1
]
[29000–32000
min
–1
]
[9000–35000
min
–1
]
[4500–35000
min
–1
]
[5] [7]
[3][1] [2]
[6] [8]
[ ] [ ]
[4000–15000
min
–1
]
[4000–15000
min
–1
]
[4000–15000
min
–1
]
[4500–26000
min
–1
]
[4500–11000
min
–1
]
[4500–11000
min
–1
]
[4500–35000
min
–1
]
[ ]
[ ]
[ ]
[ ]
[9]
[ ] [ ] [ ]
[ ] [ ] [ ]
[4000–15000
min
–1
]
[4500–35000
min
–1
]
[4500–35000
min
–1
]
[4000–15000
min
–1
]
[4000–15000
min
–1
]
[4000–15000
min
–1
]
[4500–35000
min
–1
]
[18000–35000
min
–1
]
ROTARY TOOL ACCESSORY SET
PDZ 349 A1
Operation and safety notes
ACCESSOIRES POUR PERCEUSE‑MEULEUSE DE PRÉCISION PDZ349A1
Instructions d‘utilisation et consignes de sécurité
FIJNBOORSLIJPMACHINE‑TOEBEHORENSET PDZ349A1
Bedienings‑ en veiligheidsinstructies
FEINBOHRSCHLEIFER‑ZUBEHÖRSATZ PDZ349A1
Bedienungs‑ und Sicherheitshinweise
IAN 439551_2210
[6]/
[8]
/
[ ]
/
[ ]
/
[ ]
[ ]
[1]
[ ]
[ ] /
[ ]
[ ] /
[ ]
Bekijk gratis de handleiding van Parkside PDZ 349 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PDZ 349 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1275 MB |
