Parkside PDSSAP 12 A1 handleiding
Handleiding
Je bekijkt pagina 7 van 141
GB
│
IE
│
3 ■
PDSSAP 12 A1
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level L
PA
= 97.0 dB
Uncertainty K
PA
= 3 dB
Sound power level: L
WA
= 105.0 dB
Uncertainty K
WA
= 3 dB
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Tightening screws and nuts of maximum permissible
size a
h
= 4.096 m/s
2
Uncertainty K = 1.5 m/s
2
Wear ear muffs!
NOTE
► The vibration emission values and the noise
emission values given in these instructions have
been measured in accordance with a standard-
ised test procedure and can be used for
comparison of the power tool with another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece being worked, the
vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
► Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the power
tool is switched on but running without load).
The appliance is part of the Parkside
series and can be operated using Parkside
batteries.
Batteries from the Parkside
series may
only be charged using Parkside
series
chargers.
We recommend that you only operate this
appliance with the following batteries:
PAPK12A1/A2/A3/B1/B3/C1/D1/PAPK 12
2.5/5.0 A1.
We recommend that you charge these batteries
with the following chargers:
PLGK12A1/A2/A3/B2/PLGK 12 6.0 A1/
PDSLG 12 A1.
General power
toolsafety warnings
WARNING!
► Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery- operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks, which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
IB_449979_PDSSAP12A1_LB8.indb 3 18.03.2024 08:44:53
Bekijk gratis de handleiding van Parkside PDSSAP 12 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PDSSAP 12 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14915 MB |
