Parkside PBSDA 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 7 van 181
GB
│
IE
│
3 ■
PBSDA 20-Li A1
Technical specifications
Rated voltage
20 V
(DC)
Idle belt speed 230–410 m/min.
Rated idle speed n
0
500–900 rpm
Abrasive belt 75 x 457 mm
* BATTERY AND CHARGER ARE NOT SUPPLIED
The appliance is part of the Parkside
series and can be operated using Parkside
batteries.
Batteries from the Parkside
series may
only be charged using Parkside series
chargers.
We recommend that you only operate this
appliance with the following batteries:
PAP20A1/PAP20A2/PAP20A3/PAP20B1/
PAP20B3/Smart PAPS204A1/Smart
PAPS208A1.
We recommend that you charge these batteries
with the following chargers:
PLG 20 A3/PLG 20 A4/PLG 20 C1/PLG 20 C3
PDSLG 20 A1/Smart PLGS 2012 A1
Noise emission value
Noise measurement value determined in
accordance with EN62841. The A-rated
noise level of the power tool is typically:
Sound pressure level L
pA
= 88.4 dB
Uncertainty K
pA
= 3 dB
Sound power level L
WA
= 96.4 dB
Uncertainty K
WA
= 3 dB
Wear hearing protection!
Total vibration value
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841:
Total vibration value a
h
< 2.5 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used, and in particular the kind of
workpiece being worked, the vibration and
noise emission values can deviate from the val-
ues given in these instructions during actual
use of the power tool.
► It is necessary to establish safety measures to
protect the operator based on an estimation of
the vibration load during actual use (wherein
all states of operation must be included, e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
Bekijk gratis de handleiding van Parkside PBSDA 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PBSDA 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19465 MB |
