Parkside PBNSG 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 6 van 28
PBNSG 20-Li A1
GB
│
IE
│
NI
│
3 ■
We recommend that you only operate this appli-
ance with the following batteries:
PAP20A1/PAP20A2/PAP20A3/PAP20B1/
PAP20B3/Smart PAPS204A1/Smart
PAPS208A1.
We recommend that you charge these batteries
with the following chargers:
PLG 20 A3/PLG 20 A4/PLG 20 C1/PLG 20 C3
PDSLG 20 A1/Smart PLGS 2012 A1.
NOTE
► The storage climate should be cool and dry,
and the ambient temperature should be be-
tween 0°C and 50°C.
► The recommended ambient temperature for
tools and batteries is between -5°C and
50°C.
Noise emission value
Noise measurement value determined in accor-
dance with EN62841. The A-rated noise level of
the power tool is typically:
Sound pressure level L
PA
= 73.8 dB (A)
Uncertainty K K
PA
= 3 dB
Sound power level L
WA
= 81.8 dB (A)
Uncertainty K K
WA
= 3 dB
Vibration emission value
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841:
Installing blind rivets a
h
= 1.082 m/s
2
Uncertainty K = 1.5 m/s
2
Wear ear muffs!
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with anoth-
er tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the pow-
er tool is being used, and in particular the
kind of workpiece being worked, the vibration
and noise emission values can deviate from
the values given in these instructions during
actual use of the power tool.
► Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load include, for example, wearing gloves and
limiting the working time. Wherein all states
of operation must be included (e.g. times
when the power tool is switched off and times
where the power tool is switched on but run-
ning without load).
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool.Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-op-
erated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools cre-
ate sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
IB_444079_PBNSG20-LiA1_IE-NI.indb 3IB_444079_PBNSG20-LiA1_IE-NI.indb 3 16.01.2024 12:04:0516.01.2024 12:04:05
Bekijk gratis de handleiding van Parkside PBNSG 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PBNSG 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3289 MB |
