Parkside PBH 1550 A1 handleiding
Handleiding
Je bekijkt pagina 16 van 19
16
NI
WARNING!
The vibration and noise emissions during the
actual use of the power tool may differ from
the specified values, depending on the manner
in which the power tool is used, especially, the
type of workpiece being machined
Try to keep the vibrations and noise as low
as possible. Sample measures for reducing
the vibrations are wearing gloves when using
the tool and limiting the duration of work. All
the parts of the operating cycle have to be
considered here (for example, duration when
the power tool is switched off, and durations
when it is on but running without load).
9. Recycling
Disposal of packaging
Disposing of the drill
Dispose of packaging separately.
Dispose of card and paper in waste
paper, plastic at collection points.
This symbol indicates that this
product may not be disposed of
together with domestic waste in
compliance with the (2012/19/EC)
directive pertaining to waste electrical and
electronic devices (WEEE). This product
must be returned to a designated collection
point. This can occur, for example, by
returning it when a similar product is
purchased or by handing it in at an
authorised collecting point for the recycling
of waste electrical and electronic
equipment. Owing to potentially hazardous
substances that are frequently contained in
waste electronic equipment, incorrect
handling of waste equipment may have a
negative impact on the environment and on
the health of human beings. By disposing of
this product correctly, you are also
contributing towards an efficient use of
natural resources. Information on collecting
points for waste equipment can be obtained
from your local authority, the public waste
disposal authority, an authorised institution
for the disposal of waste electrical and
electronic equipment or the waste collection
services. Dispose of the product and
packaging in an environmentally friendly
manner.
10. Declaration of
conformity
The EU Declaration of Conformity can
be found on the penultimate page of this
manual.
Warranty provided by Walter
Werkzeuge Salzburg GmbH
Dear customer,
This product comes with a 3-year warranty
from the date of purchase. In case of defects
in the product you may be entitled to legal
claims against the seller of the product.
These legal claims are not restricted by the
following warranty.
Conditions of warranty
The warranty period begins with the date of
purchase. Please preserve the original sales
receipt. This document is required as proof
of purchase.
If a material or fabrication defect occurs in
this product within three years from the date
of purchase, the product shall be repaired
or replaced free of cost at our discretion.
Within the three year period the warranty
requires the defective product and the
purchase document (sales receipt) to be
11. Warranty
Bekijk gratis de handleiding van Parkside PBH 1550 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PBH 1550 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2661 MB |
