Parkside PASSK 20-Li C3 handleiding
Handleiding
Je bekijkt pagina 8 van 162
PASSK 20-Li C3
GB
│
IE
│
3 ■
Rechargeable battery PAP 20 B3*
Type LITHIUM ION
Rated voltage 20 V
(DC)
Capacity 4 Ah/80Wh
Cells 10
NOTE
► Note that the full performance of the unit
can only be achieved if the PAP 20 A3/
PAP20B3 battery is used.
High-speed battery charger PLG 20 C3*
INPUT
Rated voltage 230–240 V ∼,
50 Hz (AC)
Rated power
consumption 120 W
Fuse (internal) 3.15 A
T3.15A
OUTPUT
Rated voltage 21.5 V
(DC)
Rated current 4.5 A
Charging time approx. 60 min
Protection class II / (double insulation)
* BATTERY AND CHARGER ARE NOT INCLUDED
Noise emission value
Noise measurement value determined in
accordance with EN 62841. The A-rated noise
level of the power tool is typically:
Sound pressure level L
PA
= 91.2 dB (A)
Uncertainty K K
PA
= 3 dB
Sound power level L
WA
= 99.2 dB (A)
Uncertainty K K
WA
= 3 dB
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Tightening screws and nuts of maximum permissible
size a
h
= 12.47 m/s
2
Uncertainty K = 1.5 m/s
2
Wear hearing protection!
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
► Try to keep the load as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General power
tool safety warnings
WARNING!
► Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Bekijk gratis de handleiding van Parkside PASSK 20-Li C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PASSK 20-Li C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18139 MB |
