Parkside PASA 20-Li C2 handleiding
Handleiding
Je bekijkt pagina 9 van 41
8 GB/IE/NI
Max. cut length: 60mm (with branch
claw)
90mm (without
branch claw)
Saw blade holder: ½" (12.7mm)
Battery pack* PAP20B3
Type:
Lithium-lon
Rated voltage: 20 V
Capacity: 4.0Ah
Cells: 10
Charger* PLG20C3
Input
Rated voltage: 230‒240 V∼, 50 Hz
Rated power
consumption: 120W
Fuse (internal): 3.15A
T3.15A
Output
Rated voltage: 21.5 V
Rated current: 4.5A
Charging time: approx. 60 minutes
Protection class:
II/ (double
insulation)
* Battery pack and charger are not included.
Recommended ambient temperature
While charging: +4to+40°C
During operation: +4to+40°C
During storage: +20to+26°C
Noise emission value
Noise measurement value determined in
accordance with EN62841. The A-rated noise
level of the power tool at the working location is
typically as follows:
Sound pressure level L
pA
: 79.3dB(A)
Uncertainty K
pA
: 5dB
Sound power level L
WA
: 87.3dB(A)
Uncertainty K
WA
: 5dB
m
WARNING!
Wear hearing protection!
Vibration emission value
Total vibration values (vector total of three
directions) determined in accordance with
EN62841:
Sawing chipboard a
h,B
: 3.842m/s
2
Uncertainty K: 1.5m/s
2
Sawing wood beams a
h,WB
: 3.731m/s
2
Uncertainty K: 1.5m/s
2
NOTE
u The vibration emission values and the
noise emission values given in these
instructions have been measured
in accordance with a standardised
test procedure and can be used for
comparison of the power tool with
another tool.
u The specified total vibration values and
the noise emission values can also be
used to make a provisional load estimate.
m
WARNING!
u Depending on the manner in which
the power tool is being used and, in
particular, the kind of workpiece being
worked, the vibration and noise emission
values can deviate from the values given
in these instructions during actual use of
the power tool.
u It is necessary to establish safety
measures to protect the operator based
on an estimation of the vibration load
during actual use (wherein all states of
operation must be included, e.g. times
when the power tool is switched off and
times where the power tool is switched on
but running without load).
Bekijk gratis de handleiding van Parkside PASA 20-Li C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PASA 20-Li C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4162 MB |
